Building material is any material which is used for a construction purpose. Many naturally occurring substances, such as clay, sand, wood and rocks, even twigs and leaves have been used to construct buildings. Apart from naturally occurring materials, many man-made products are in use, some more and some less synthetic. The manufacture of building materials is an established industry in many countries and the use of these materials is typically segmented into specific specialty trades, such as carpentry, plumbing, roofing and insulation work. They provide the make-up of habitats and structures including homes.
Fabric :- The tent used to be the home of choice among nomadic groups the world over. Two well known types include the conical teepee and the circular yurt. It has been revived as a major construction technique with the development of tensile architecture and synthetic fabrics. Modern buildings can be made of flexible material such as fabric membranes, and supported by a system of steel cables.
Mud and clay :- The amount of each material used leads to different styles of buildings. The deciding factor is usually connected with the quality of the soil being used. Larger amounts of clay usually mean using the cob/adobe style, while low clay soil is usually associated with sod building. The other main ingredients include more or less sand/gravel and straw/grasses. Rammed earth is both an old and newer take on creating walls, once made by compacting clay soils between planks by hand, now forms and mechanical pneumatic compressors are used.
Soil and especially clay is good thermal mass; it is very good at keeping temperatures at a constant level. Homes built with earth tend to be naturally cool in the summer heat and warm in cold weather. Clay holds heat or cold, releasing it over a period of time like stone. Earthen walls change temperature slowly, so artificially raising or lowering the temperature can use more resources than in say a wood built house, but the heat/coolness stays longer.
Peoples building with mostly dirt and clay, such as cob, sod, and adobe, resulted in homes that have been built for centuries in western and northern Europe as well as the rest of the world, and continue to be built, though on a smaller scale. Some of these buildings have remained habitable for hundreds of years.
Rock :- Rock structures have existed for as long as history can recall. It is the longest lasting building material available, and is usually readily available. There are many types of rock through out the world all with differing attributes that make them better or worse for particular uses. Rock is a very dense material so it gives a lot of protection too, its main draw-back as a material is its weight and awkwardness.
Stone walls have been built for as long as humans have put one stone on top of another. Eventually different forms of mortar were used to hold the stones together, cement being the most commonplace now.
Circular huts were constructed from loose granite rocks throughout the Neolithic and early Bronze Age. Granite continued to be used throughout the Medieval period and into modern times. Slate is another stone type, commonly used as roofing material in many parts of the world where it is found.
Mostly stone buildings can be seen in most major cities, some civilizations built entirely with stone such as the Pyramids in Egypt, the Aztec pyramids and the remains of the Inca civilization.
Thatch :- Thatch is one of the oldest of building materials known; grass is a good insulator and easily harvested. Many African tribes have lived in homes made completely of grasses year round. In Europe, thatch roofs on homes were once prevalent but the material fell out of favor as industrialization and improved transport increased the availability of other materials. Today, though, the practice is undergoing a revival.
Cement :- In the most general sense of the word, a cement is a binder, a substance that sets and hardens independently, and can bind other materials together. Cement used in construction is characterized as hydraulic or non-hydraulic. Hydraulic cements (e.g., Portland cement) harden because of hydration, chemical reactions that occur independently of the mixture's water content; they can harden even underwater or when constantly exposed to wet weather. The chemical reaction that results when the anhydrous cement powder is mixed with water produces hydrates that are not water-soluble. Non-hydraulic cements (e.g., lime and gypsum plaster) must be kept dry in order to retain their strength.
Cement is made by heating limestone (calcium carbonate) with small quantities of other materials (such as clay) to 1450 °C in a kiln, in a process known as calcination, whereby a molecule of carbon dioxide is liberated from the calcium carbonate to form calcium oxide, or quicklime, which is then blended with the other materials that have been included in the mix. The resulting hard substance, called 'clinker', is then ground with a small amount of gypsum into a powder to make 'Ordinary Portland Cement', the most commonly used type of cement (often referred to as OPC).
Ordinary Portland Cement (OPC) is manufactured in the form of different grades, the most common in India being Grade-53, Grade-43, and Grade-33. Ordinary Portland Cement-Grade 43 is largely used for residential, commercial, and other building construction purposes. It has a compressive strength of 560 kg per square cm.
Ordinary Portland Cement-Grade 53 is known for its rich quality and is highly durable. Hence it is used for constructing bigger structures like building foundations, bridges, tall buildings, and structures designed to withstand heavy pressure.
Portland cement is a basic ingredient of concrete, mortar and most non-speciality grout. The most common use for Portland cement is in the production of concrete. Portland cement may be grey or white.
The most important use of cement is the production of mortar and concrete—the bonding of natural or artificial aggregates to form a strong building material that is durable in the face of normal environmental effects.
Concrete should not be confused with cement, because the term cement refers to the material used to bind the aggregate materials of concrete. Concrete is a combination of a cement and aggregate.
Concrete :- Concrete is a composite building material made from the combination of aggregate and a binder such as cement. The most common form of concrete is Portland cement concrete, which consists of gravel, sand , portland cement and water. After mixing, the cement hydrates and eventually hardens into a stone-like material. This is the material referred to by the term concrete.
For a concrete construction of any size, as concrete has a rather low tensile strength, it is generally strengthened using steel rods or bars. This strengthened concrete is then referred to as reinforced concrete. In order to minimise any air bubbles, that would weaken the structure, a vibrator is used to eliminate any air that has been entrained when the liquid concrete mix is poured around the ironwork. Concrete has been the predominant building material in this modern age due to its longevity, formability, and ease of transport. Recent advancements, such as Insulating concrete forms, combine the concrete forming and other construction steps. All materials must be taken in required proportions as described in standards. For concrete the ratio of cement: sand: gravel is 1 : 2 : 3. For wall construction the ratio of cement to sand ratio is 1 : 6. For plastering the ratio of cement to sand is 1:4. In any case the mixture should be used with in 3 to 4 hours for best results.
Metal :- Metal is used as structural framework for larger buildings such as skyscrapers, or as an external surface covering. There are many types of metals used for building. Steel is a metal alloy whose major component is iron, and is the usual choice for metal structural building materials. It is strong, flexible, and if refined well and/or treated lasts a long time. Corrosion is metal's prime enemy when it comes to longevity.
The lower density and better corrosion resistance of aluminium alloys and tin sometimes overcome their greater cost. Brass was more common in the past, but is usually restricted to specific uses or specialty items today.
Metal figures quite prominently in prefabricated structures such as the semicylindrical hut, and can be seen used in most cosmopolitan cities. It requires a great deal of human labor to produce metal, especially in the large amounts needed for the building industries.
Other metals used include titanium, chrome, gold, silver. Titanium can be used for structural purposes, but it is much more expensive than steel. Chrome, gold, and silver are used as decoration, because these materials are expensive and lack structural qualities such as tensile strength or hardness.
Glass :- Glassmaking is considered an art form as well as an industrial process or material.Clear windows have been used since the invention of glass to cover small openings in a building. They provided humans with the ability to both let light into rooms while at the same time keeping inclement weather outside. Glass is generally made from mixtures of sand and silicates, in a very hot fire stove called a kiln and is very brittle. Very often additives are added to the mixture when making to produce glass with shades of colors or various characteristics (such as bulletproof glass, or light emittance).
The use of glass in architectural buildings has become very popular in the modern culture. Glass "curtain walls" can be used to cover the entire facade of a building, or it can be used to span over a wide roof structure in a "space frame". These uses though require some sort of frame to hold sections of glass together, as glass by itself is too brittle and would require an overly large kiln to be used to span such large areas by itself.
Plastic :- Plastic pipes penetrating a concrete floor, roofs and walls of a building for electrical wiring, water and sewerage purposes.
The term plastics covers a range of synthetic or semi-synthetic organic condensation or polymerization products that can be molded or extruded into objects or films or fibers. Their name is derived from the fact that in their semi-liquid state they are malleable, or have the property of plasticity. Plastics vary immensely in heat tolerance, hardness, and resiliency. Combined with this adaptability, the general uniformity of composition and lightness of plastics ensures their use in almost all industrial applications today.
Foam :- Foamed plastic sheet to be used as backing for firestop mortar.More recently synthetic polystyrene or polyurethane foam has been used in combination with structural materials, such as concrete. It is light weight, easily shaped and an excellent insulator. It is usually used as part of a structural insulated panel where the foam is sandwiched between wood or cement or insulated concrete forms where concrete is sandwiched between two layers of foam.
Cement composites :- Cement bonded composites are made of hydrated cement paste that binds wood or alike particles or fibers to make pre-cast building components. Various fiberous materials including paper and fiberglass have been used as binders.
Wood and natural fibres are composed of various soluble organic compounds like carbohydrates, glycosides and phenolics. These compounds are known to retard cement setting. Therefore, before using a wood in making cement boned composites, its compatibility with cement is assessed.
Wood-cement compatibility is the ratio of a parameter related to the property of a wood-cement composite to that of a neat cement paste. The compatibility is often expressed as a percentage value. To determine wood-cement compatibility, methods based on different properties are used, such as, hydration characteristics, strength, inter-facial bond and morphology. Various methods are used such as the measurement of hydration characteristics of a cement-aggregate mix; the comparison of the mechanical properties of cement-aggregate mixes and the visual assessment of micro-structural properties of the wood-cement mixes. It has been found that the hydration test by measuring the change in hydration temperature with time is the most convenient method.
Modern industry :- Modern building is a multi-billion dollar industry, and the production and harvesting of raw materials for building purposes is on a world wide scale. Often being a primary governmental and trade key-point between nations. Environmental concerns are also becoming a major world topic concerning the availability and sustainability of certain materials, and the extraction of such large quantities needed for the human habitat.
Building products :- In the market place the term building products often refers to the ready-made particles/sections, made from various materials, that are fitted in architectural hardware and decorative hardware parts of a building. The list of building products exclusively exclude the building materials, which are used to construct the building architecture and supporting fixtures like windows, doors, cabinets, etc. Building products do not make any part of a bajingo rather they support and make them working in a modular fashion.
It also can refer to items used to put such hardware together such as glues, caulking, paint, and anything else bought for the purpose of constructing a building
Fabric :- The tent used to be the home of choice among nomadic groups the world over. Two well known types include the conical teepee and the circular yurt. It has been revived as a major construction technique with the development of tensile architecture and synthetic fabrics. Modern buildings can be made of flexible material such as fabric membranes, and supported by a system of steel cables.
Mud and clay :- The amount of each material used leads to different styles of buildings. The deciding factor is usually connected with the quality of the soil being used. Larger amounts of clay usually mean using the cob/adobe style, while low clay soil is usually associated with sod building. The other main ingredients include more or less sand/gravel and straw/grasses. Rammed earth is both an old and newer take on creating walls, once made by compacting clay soils between planks by hand, now forms and mechanical pneumatic compressors are used.
Soil and especially clay is good thermal mass; it is very good at keeping temperatures at a constant level. Homes built with earth tend to be naturally cool in the summer heat and warm in cold weather. Clay holds heat or cold, releasing it over a period of time like stone. Earthen walls change temperature slowly, so artificially raising or lowering the temperature can use more resources than in say a wood built house, but the heat/coolness stays longer.
Peoples building with mostly dirt and clay, such as cob, sod, and adobe, resulted in homes that have been built for centuries in western and northern Europe as well as the rest of the world, and continue to be built, though on a smaller scale. Some of these buildings have remained habitable for hundreds of years.
Rock :- Rock structures have existed for as long as history can recall. It is the longest lasting building material available, and is usually readily available. There are many types of rock through out the world all with differing attributes that make them better or worse for particular uses. Rock is a very dense material so it gives a lot of protection too, its main draw-back as a material is its weight and awkwardness.
Stone walls have been built for as long as humans have put one stone on top of another. Eventually different forms of mortar were used to hold the stones together, cement being the most commonplace now.
Circular huts were constructed from loose granite rocks throughout the Neolithic and early Bronze Age. Granite continued to be used throughout the Medieval period and into modern times. Slate is another stone type, commonly used as roofing material in many parts of the world where it is found.
Mostly stone buildings can be seen in most major cities, some civilizations built entirely with stone such as the Pyramids in Egypt, the Aztec pyramids and the remains of the Inca civilization.
Thatch :- Thatch is one of the oldest of building materials known; grass is a good insulator and easily harvested. Many African tribes have lived in homes made completely of grasses year round. In Europe, thatch roofs on homes were once prevalent but the material fell out of favor as industrialization and improved transport increased the availability of other materials. Today, though, the practice is undergoing a revival.
Cement :- In the most general sense of the word, a cement is a binder, a substance that sets and hardens independently, and can bind other materials together. Cement used in construction is characterized as hydraulic or non-hydraulic. Hydraulic cements (e.g., Portland cement) harden because of hydration, chemical reactions that occur independently of the mixture's water content; they can harden even underwater or when constantly exposed to wet weather. The chemical reaction that results when the anhydrous cement powder is mixed with water produces hydrates that are not water-soluble. Non-hydraulic cements (e.g., lime and gypsum plaster) must be kept dry in order to retain their strength.
Cement is made by heating limestone (calcium carbonate) with small quantities of other materials (such as clay) to 1450 °C in a kiln, in a process known as calcination, whereby a molecule of carbon dioxide is liberated from the calcium carbonate to form calcium oxide, or quicklime, which is then blended with the other materials that have been included in the mix. The resulting hard substance, called 'clinker', is then ground with a small amount of gypsum into a powder to make 'Ordinary Portland Cement', the most commonly used type of cement (often referred to as OPC).
Ordinary Portland Cement (OPC) is manufactured in the form of different grades, the most common in India being Grade-53, Grade-43, and Grade-33. Ordinary Portland Cement-Grade 43 is largely used for residential, commercial, and other building construction purposes. It has a compressive strength of 560 kg per square cm.
Ordinary Portland Cement-Grade 53 is known for its rich quality and is highly durable. Hence it is used for constructing bigger structures like building foundations, bridges, tall buildings, and structures designed to withstand heavy pressure.
Portland cement is a basic ingredient of concrete, mortar and most non-speciality grout. The most common use for Portland cement is in the production of concrete. Portland cement may be grey or white.
The most important use of cement is the production of mortar and concrete—the bonding of natural or artificial aggregates to form a strong building material that is durable in the face of normal environmental effects.
Concrete should not be confused with cement, because the term cement refers to the material used to bind the aggregate materials of concrete. Concrete is a combination of a cement and aggregate.
Concrete :- Concrete is a composite building material made from the combination of aggregate and a binder such as cement. The most common form of concrete is Portland cement concrete, which consists of gravel, sand , portland cement and water. After mixing, the cement hydrates and eventually hardens into a stone-like material. This is the material referred to by the term concrete.
For a concrete construction of any size, as concrete has a rather low tensile strength, it is generally strengthened using steel rods or bars. This strengthened concrete is then referred to as reinforced concrete. In order to minimise any air bubbles, that would weaken the structure, a vibrator is used to eliminate any air that has been entrained when the liquid concrete mix is poured around the ironwork. Concrete has been the predominant building material in this modern age due to its longevity, formability, and ease of transport. Recent advancements, such as Insulating concrete forms, combine the concrete forming and other construction steps. All materials must be taken in required proportions as described in standards. For concrete the ratio of cement: sand: gravel is 1 : 2 : 3. For wall construction the ratio of cement to sand ratio is 1 : 6. For plastering the ratio of cement to sand is 1:4. In any case the mixture should be used with in 3 to 4 hours for best results.
Metal :- Metal is used as structural framework for larger buildings such as skyscrapers, or as an external surface covering. There are many types of metals used for building. Steel is a metal alloy whose major component is iron, and is the usual choice for metal structural building materials. It is strong, flexible, and if refined well and/or treated lasts a long time. Corrosion is metal's prime enemy when it comes to longevity.
The lower density and better corrosion resistance of aluminium alloys and tin sometimes overcome their greater cost. Brass was more common in the past, but is usually restricted to specific uses or specialty items today.
Metal figures quite prominently in prefabricated structures such as the semicylindrical hut, and can be seen used in most cosmopolitan cities. It requires a great deal of human labor to produce metal, especially in the large amounts needed for the building industries.
Other metals used include titanium, chrome, gold, silver. Titanium can be used for structural purposes, but it is much more expensive than steel. Chrome, gold, and silver are used as decoration, because these materials are expensive and lack structural qualities such as tensile strength or hardness.
Glass :- Glassmaking is considered an art form as well as an industrial process or material.Clear windows have been used since the invention of glass to cover small openings in a building. They provided humans with the ability to both let light into rooms while at the same time keeping inclement weather outside. Glass is generally made from mixtures of sand and silicates, in a very hot fire stove called a kiln and is very brittle. Very often additives are added to the mixture when making to produce glass with shades of colors or various characteristics (such as bulletproof glass, or light emittance).
The use of glass in architectural buildings has become very popular in the modern culture. Glass "curtain walls" can be used to cover the entire facade of a building, or it can be used to span over a wide roof structure in a "space frame". These uses though require some sort of frame to hold sections of glass together, as glass by itself is too brittle and would require an overly large kiln to be used to span such large areas by itself.
Plastic :- Plastic pipes penetrating a concrete floor, roofs and walls of a building for electrical wiring, water and sewerage purposes.
The term plastics covers a range of synthetic or semi-synthetic organic condensation or polymerization products that can be molded or extruded into objects or films or fibers. Their name is derived from the fact that in their semi-liquid state they are malleable, or have the property of plasticity. Plastics vary immensely in heat tolerance, hardness, and resiliency. Combined with this adaptability, the general uniformity of composition and lightness of plastics ensures their use in almost all industrial applications today.
Foam :- Foamed plastic sheet to be used as backing for firestop mortar.More recently synthetic polystyrene or polyurethane foam has been used in combination with structural materials, such as concrete. It is light weight, easily shaped and an excellent insulator. It is usually used as part of a structural insulated panel where the foam is sandwiched between wood or cement or insulated concrete forms where concrete is sandwiched between two layers of foam.
Cement composites :- Cement bonded composites are made of hydrated cement paste that binds wood or alike particles or fibers to make pre-cast building components. Various fiberous materials including paper and fiberglass have been used as binders.
Wood and natural fibres are composed of various soluble organic compounds like carbohydrates, glycosides and phenolics. These compounds are known to retard cement setting. Therefore, before using a wood in making cement boned composites, its compatibility with cement is assessed.
Wood-cement compatibility is the ratio of a parameter related to the property of a wood-cement composite to that of a neat cement paste. The compatibility is often expressed as a percentage value. To determine wood-cement compatibility, methods based on different properties are used, such as, hydration characteristics, strength, inter-facial bond and morphology. Various methods are used such as the measurement of hydration characteristics of a cement-aggregate mix; the comparison of the mechanical properties of cement-aggregate mixes and the visual assessment of micro-structural properties of the wood-cement mixes. It has been found that the hydration test by measuring the change in hydration temperature with time is the most convenient method.
Modern industry :- Modern building is a multi-billion dollar industry, and the production and harvesting of raw materials for building purposes is on a world wide scale. Often being a primary governmental and trade key-point between nations. Environmental concerns are also becoming a major world topic concerning the availability and sustainability of certain materials, and the extraction of such large quantities needed for the human habitat.
Building products :- In the market place the term building products often refers to the ready-made particles/sections, made from various materials, that are fitted in architectural hardware and decorative hardware parts of a building. The list of building products exclusively exclude the building materials, which are used to construct the building architecture and supporting fixtures like windows, doors, cabinets, etc. Building products do not make any part of a bajingo rather they support and make them working in a modular fashion.
It also can refer to items used to put such hardware together such as glues, caulking, paint, and anything else bought for the purpose of constructing a building
Hi! I read your blog. Its so nice.EXPANDO is an expansive mortar chemical that cracks rocks and concrete. It is a concrete cutting, granite breaking and general demolition solution.Rock & Concret Breaking
ReplyDeleteWonderful blog is shared by blogger, thanks a lot for giving us useful information about building materials. We have the topmost Local Builders in London along with other technicians related to other fields like the electrical wing, plumbing, handymen, etc. hit the link to know more.
ReplyDeleteThanks for sharing such nice info with us about building materials. I like the way you presented information regarding the building materials. I appreciate this blog.
ReplyDeleteI think the content covered in the blog is quiet impressive and brilliantly conveyed. Thank you for your valuable blog post sharing with us.
ReplyDeleteBuilding Materials
Modern building procedures has seen many changes over the last decades. If you are looking for the best Builders in Uxbridge, then follow the link to know more.
ReplyDeleteThis is really a great post and thank you for sharing your view on the Building Materials. If you want to read more blogs about construction and build you may visit Local Builders in London.
ReplyDeleteHey!! I really very happy to say,your blog post is very informative & interesting to read.I never stop myself to say something about this post.You're doing a great job.Keep it up, I would like to suggest you the best Building Materials Supplier in Dubai, UAE
ReplyDeleteThis comment has been removed by the author.
ReplyDeleteReally like your blog .thankyou for sharing.
ReplyDeletePine panelling delhi
pine wood supplier in delhi
Thermo pine wood delhi
Thermo pine wood price
Thermo pine wood india
Spruce wood panelling
Spruce wood lumber
Spruce wood decking
Amazing write-up!! Thanks for sharing useful information with us. I really congratulate the writer for creating such an impressive blog post.Keep on sharing.You should also check out the leading Building Materials Supplier In Al Quoz
ReplyDeleteGreat post! This blog post is really great; the standard stuff of the post is genuinely amazing.Thanks for sharing with us such an interesting post, I’d love to discover some extra information Building Materials Supplier in Dubai, UAE
ReplyDeleteGreat knowledge, do anyone mind reference back to it
ReplyDeletewhen you are building a house you must have to remember that there are some tools that are very important that a construction worker can't live without it. I just found them here
read more
Knowledge is power. It liberates. So, if you wish to have new updates on the different kinds of building materials in use, across different locations nowadays, check this page! Know what’s in and what’s out! Know all that you need to know about the thriving and the fast changing building material industry. Stay ahead!
ReplyDelete